Features
FAST, SMOOTH CUTTING
The maneuverable 3,16m Discbine® 210 make high-quality hay with the smooth, trouble-free performance you expect from a genuine Discbine.
MOWMAX™ DISC CUTTERBAR
New Holland’s MowMax™ disc cutterbar breezes through tough mowing conditions.
QUICKMAX™ BLADE CHANGE SYSTEM IS STANDARD EQUIPMENT
The QuickMax™ knife change system makes it easy to keep knives sharp for the close, clean cut you want and increased tonnage.
HIGH QUALITY AND FAST DRYDOWN
Choose the best conditioning system for your crops – rubber chevron rolls, steel chevron rolls or advanced LeaningEdge™ flail tines.
Gallery
SPECIFICATIONS
Standard 
Optional 
Optional Cutterbar
| Cutting width ft. in. (m) |
| Cutterbar model |
| Number of discs |
| Knives per disc |
| Disc speed @ 540 rpm PTO speed rpm |
| Tilt angle degrees |
| Flotation |
| Drive method |
| Cutting height in. (mm) |
| Cutting height w/optional high-stubble shoes in. (mm) |
| Cutting height w/optional adjustable shoes in. (mm) |
| Discbine® 209 | Discbine® 210 |
|---|---|
| 9’ 2” (2.8) | 10’ 4” (3.16) |
| MowMax™ Modular Cutterbar with ShockPRO™ hubs | MowMax™ Modular Cutterbar with ShockPRO™ hubs |
| 7 | 8 |
| 2 | 2 |
| 3000 | 3000 |
| 2° - 10° | 2° - 10° |
| Up & back, adjustable springs | Up & back, adjustable springs |
| PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar | PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar |
| 1.1-2.7 (29-68) | Flail Tine: 1.1-2.7 (29-68) or Roll: .95-2.4 (24-60) |
| 2.25-4.5 (58-115) | 2.25-4.5 (58-115) |
| 2.25-4.5 (58-115) | 2.25-4.5 (58-115) |
Roll Conditioners
| Type |
| Length / Diameter in. (mm) |
| Drive method |
| Speed rpm |
| Conditioner roll tension adjustment |
| Conditioner gap adjustment |
| Discbine® 209 | Discbine® 210 |
|---|---|
| Chevron intermeshing rubber | Chevron intermeshing rubber or steel rolls |
| 90 (2286) / 10.4 (264) | 102 (2591) / 10.4 (264) |
| 4 HB V-belt and enclosed gears | 4 HB V-belt and enclosed gears |
| 647 | 647 |
| Single crank | Single crank |
| Adjustable drawbolt stop, each end | Adjustable drawbolt stop, each end |
LeaningEdge Flail Conditioners
| Type |
| Length / Diameter in. (mm) |
| Drive method |
| Speed rpm |
| Conditioner gap adjustment |
| Discbine® 209 | Discbine® 210 |
|---|---|
| Flail rotor with 90 tapered flails | Flail rotor with 100 tapered flails |
| 90 (2286) / 22 (560) | 102 (2591) / 22 (560) |
| 4 HB v-belt | 4 HB v-belt |
| 718 std. 1000 opt. | 718 std. 1000 opt. |
| Single crank adjustable rotor hood | Single crank adjustable rotor hood |
Crop Discharge
| Swath width ft. (m) |
| Windrow width ft. (m) |
| Discbine® 209 | Discbine® 210 |
|---|---|
| 6 (1.83) | 7 (2.13) |
| 3-6 (0.9-1.83) | 3-7 (0.9-2.13) |
Driveline
| Input speed rpm |
| Driveline protection |
| Secondary driveline |
| Discbine® 209 | Discbine® 210 |
|---|---|
| 540 | 540 or 1000 Standard Drawbar Attachment - 540 Only Swivel Hitch Attachment |
| Slip clutch and overrunning clutch assembly at rear of PTO shaft | Slip clutch and overrunning clutch assembly at rear of PTO shaft |
| Non-CV driveline | Double CV Driveline - Head repositionable under |
Tongue Options
| Type |
| Hitch type |
| Discbine® 209 | Discbine® 210 |
|---|---|
| Side-pull, straight tongue | Side-pull, curved tongue |
| Drawbar with CV PTO | Standard Drawbar with CV PTO - Swivel hitch with drawbar adapter or 2-point hitch |
Tractor Requirements
| Minimum PTO power required hp (kW) |
| Hydraulic circuits required |
| Minimum relief pressure required psi (bar) |
| Drawbar |
| Swivel Hitch - Drawbar |
| Swivel Hitch - 2-Point |
| Electrical |
| Discbine® 209 | Discbine® 210 |
|---|---|
| 65 (49) | 80 (60) |
| 2 | 2 |
| 1500 (103) | 1500 (103) |
| ASAE Category II | ASAE Category II |
| – | ASAE Category II or III |
| – | ASAE Category II, III-N, or III |
| 7-pin electrical connector for transport lights | 7-pin electrical connector for transport lights |
Tires
| Tubeless ag rib implement tires |
| Discbine® 209 | Discbine® 210 |
|---|---|
| 9.5L x 14L 6PR | Flail Tine: 9.5L x 14L 6PR / Roll: 11L x 15L 6 PR |
Transport Speed
| Max road speed mph (kph) |
| Discbine® 209 | Discbine® 210 |
|---|---|
| 20 (32) | 20 (32) |
Dimensions*
| Width, transport ft. in. (m) |
| Width , operating ft. in. (m) |
| Length, transport ft. in. (m) |
| Length, operating ft. in. (m) |
| Height ft. in. (m) |
| Ground clearance with head fully raised in. (mm) |
| Discbine® 209 | Discbine® 210 |
|---|---|
| 9’ 11” (3.02) | 11’ 3” (3.42) |
| 14’ 10” (4.52) | 16’ 0” (4.87) / 17’ 7’’ (5.36), with swivel hitch equipped |
| Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)*** | Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)*** |
| Flail Tine: 17’ 8’’ (5.4)*** or Roll: 17’ 2’’ (5.23)*** | Flail Tine: 17’ 8’’ (5.4)*** or Roll: 15’ 7’’ (4.75)*** |
| Transport: 5’ 8” (1.73) / Operating: 4’ 5” (1.35) | Transport: 5’ 3” (1.60) / Operating: 4’ 5” (1.35) |
| 17 (4.32) | Flail Tine: 17 (4.32) or Roll: 18 (4.57) |
Weights**
| Operating weight lbs. (kg.) |
| Discbine® 209 | Discbine® 210 |
|---|---|
| Flail Tine: 3690 (1674)*** / Roll: 3740 (1697)*** | Flail Tine: 4100 (1864)*** / Roll: 4160 (1891)*** |
— Not Available
* Rear curtain down for all height and length measurements on machines with flail conditioners. Subtract 2” (50.8 mm) for flacilu rtain up. Windrow shields fully open for length in both positions .
** Weights with rubber conditioning rolls. Add 100 lbs. (45 kg) for steel rolls.
*** Weights & dimensions are with standard drawbar hitch. Add 150 lbs. (68 kg) & 2 ft. (.60) length for swivel hitch models.