DURADISC™ HEAVY-DUTY DISC MOWERS

Features

DURABILITY IS STANDARD

DuraDisc™ heavy-duty disc mowers from New Holland combine fast cutting with trouble-free operation and easy servicing to assure you of the dependable performance you need season after season.

MOWMAX™ DISC CUTTERBAR 3-YEAR FACTORY WARRANTY

New Holland’s MowMax™ disc cutterbar breezes through tough mowing conditions and is backed by three full years of factory warranty so you can cut close with confidence.

QUICKMAX™ KNIFE CHANGE SYSTEM KEEPS YOU SHARP

The QuickMax™ knife change system makes it quick and easy to keep knives sharp for the best cut quality.

CONVENIENTLY MOVE FROM ONE TASK TO THE NEXT

Quick-hitch compatibility on mounted models makes hooking and unhooking the mower from the tractor simple so you can move from mowing to tedding or raking seamlessly.

Gallery

MODELS

DuraDisc™ 107M

Cutting width ft. in. (m)6'8" (2.0)
Number of discs5
Minimum PTO horsepower required hp (kW)45 (33.5)
HitchCategory I/II or Category II quick hitch compatible


Standard  Optional 
DuraDisc™ 107M
Cutterbar
Cutting width ft. in. (m)6'8" (2.0)
Cutting height in. (mm)1.25-3.5 (32-89)
Cutterbar tilt angle degrees0 to -10
Cutterbar operating range degrees+18 to -32
Breakaway angle degrees19
Cutterbar flotationVertical adjustable spring
Type cutterbarMowMax™ cutterbar, modular, with individual sealed reservoirs
Number of discs5
Knives per disc2
Disc cutting diameter in. (mm)19.7 (500)
Disc driveBevel gears in sealed modules
Disc speed RPM3000
Cutterbar gear protectionStd. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines
Swath width, approx standard* in. (mm)80 (2032)
Swath width with optional swathboards* in. (mm)48 (1219) includes LH & RH swathboards
Driveline
Minimum PTO horsepower required hp (kW)45 (33.5)
Input speed RPM540
PTO shaft spline/size required6-spline / 1-3/8"
Driveline protectionBelt drive to cutter bar
Overrunning clutch
Belt tensionSpring-loaded tensioner with adjustment gauge
Hydraulics and Hitch
Hydraulic circuits requiredOne remote
Minimum relief pressure required psi (bar)1500 (103)
HitchCategory I/II or Category II quick hitch compatible
Dimensions and Weight
Overall width in. (mm)138.75 (3524)
Overall length in. (mm)42.5 (1080)
Height - transport position** in. (mm)98 (2489)
Weight, operating lb. (kg)1200 (546)
Maximum transport speed–
Tires/wheels–

DuraDisc™ 108M

Cutting width ft. in. (m)7'10" (2.4)
Number of discs6
Minimum PTO horsepower required hp (kW)55 (40.9)
HitchCategory II quick hitch compatible


Standard  Optional 
DuraDisc™ 108M
Cutterbar
Cutting width ft. in. (m)7'10" (2.4)
Cutting height in. (mm)1.25-3.5 (32-89)
Cutterbar tilt angle degrees0 to -10
Cutterbar operating range degrees+18 to -30
Breakaway angle degrees30.5
Cutterbar flotationVertical adjustable spring
Type cutterbarMowMax™ cutterbar, modular, with individual sealed reservoirs
Number of discs6
Knives per disc2
Disc cutting diameter in. (mm)19.7 (500)
Disc driveBevel gears in sealed modules
Disc speed RPM3000
Cutterbar gear protectionStd. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines
Swath width, approx standard* in. (mm)94 (2388)
Swath width with optional swathboards* in. (mm)62 (1575) includes LH & RH swathboards
Driveline
Minimum PTO horsepower required hp (kW)55 (40.9)
Input speed RPM540
PTO shaft spline/size required6-spline / 1-3/8”
Driveline protectionBelt drive to cutter bar
Overrunning clutch
Belt tensionSpring-loaded tensioner with adjustment gauge
Hydraulics and Hitch
Hydraulic circuits requiredOne remote
Minimum relief pressure required psi (bar)1500 (103)
HitchCategory II quick hitch compatible
Dimensions and Weight
Overall width in. (mm)160.25 (4070)
Overall length in. (mm)50.5 (1283)
Height - transport position** in. (mm)119.5 (3035)
Weight, operating lb. (kg)1405 (639)
Maximum transport speed–
Tires/wheels–

DuraDisc™ 109M

Cutting width ft. in. (m)9'2" (2.8)
Number of discs7
Minimum PTO horsepower required hp (kW)60 (44.7)
HitchCategory II quick hitch compatible


Standard  Optional 
DuraDisc™ 109M
Cutterbar
Cutting width ft. in. (m)9'2" (2.8)
Cutting height in. (mm)1.25-3.5 (32-89)
Cutterbar tilt angle degrees0 to -10
Cutterbar operating range degrees+18 to -28
Breakaway angle degrees30.5
Cutterbar flotationVertical adjustable spring
Type cutterbarMowMax™ cutterbar, modular, with individual sealed reservoirs
Number of discs7
Knives per disc2
Disc cutting diameter in. (mm)19.7 (500)
Disc driveBevel gears in sealed modules
Disc speed RPM3000
Cutterbar gear protectionStd. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines
Swath width, approx standard* in. (mm)110 (2794)
Swath width with optional swathboards* in. (mm)78 (1981) includes LH & RH swathboards
Driveline
Minimum PTO horsepower required hp (kW)60 (44.7)
Input speed RPM540
PTO shaft spline/size required6-spline / 1-3/8”
Driveline protectionBelt drive to cutter bar
Overrunning clutch
Belt tensionSpring-loaded tensioner with adjustment gauge
Hydraulics and Hitch
Hydraulic circuits requiredOne remote
Minimum relief pressure required psi (bar)1500 (103)
HitchCategory II quick hitch compatible
Dimensions and Weight
Overall width in. (mm)181.75 (4616)
Overall length in. (mm)50.5 (1283)
Height - transport position** in. (mm)141 (3581)
Weight, operating lb. (kg)1535 (698)
Maximum transport speed–
Tires/wheels–

DuraDisc™ 210M

Cutting width ft. in. (m)10'4" (3.2)
Number of discs8
Minimum PTO horsepower required hp (kW)60 (44.7)
HitchDrawbar clevis hitch


Standard  Optional 
DuraDisc™ 210M
Cutterbar
Cutting width ft. in. (m)10'4" (3.2)
Cutting height in. (mm)0.95-3.2 (24-81)
Cutterbar tilt angle degrees-2 to -10
Cutterbar operating range degrees+18 to -28
Breakaway angle degrees–
Cutterbar flotationVertical and lateral, adjustable springs
Type cutterbarMowMax™ cutterbar, modular, with individual sealed reservoirs
Number of discs8
Knives per disc2
Disc cutting diameter in. (mm)19.7 (500)
Disc driveBevel gears in sealed modules
Disc speed RPM3000
Cutterbar gear protectionStd. ShockPRO™: easy replace ShockPRO hub with a partial complement of sacrificial splines
Swath width, approx standard* in. (mm)95 (2413)
Swath width with optional swathboards* in. (mm)–
Driveline
Minimum PTO horsepower required hp (kW)60 (44.7)
Input speed RPM540
PTO shaft spline/size required6-spline / 1-3/8”
Driveline protectionSlip clutch
Overrunning clutch
Belt tension–
Hydraulics and Hitch
Hydraulic circuits requiredTwo remotes
Minimum relief pressure required psi (bar)1500 (103)
HitchDrawbar clevis hitch
Dimensions and Weight
Overall width in. (mm)196 (4978)
Overall length in. (mm)183 (4648)
Height - transport position** in. (mm)62 (1575)
Weight, operating lb. (kg)2610 (1186)
Maximum transport speed20 mph/ 32.2 kph
Tires/wheels27 x 9.5 x 15 6 PR
Back

Standard – Not available ​
Note: Recommended for use with tractors having a fully enclosed cab
*Heavy swaths may fluff out to a wider swath after exiting the swathboard(s)
**Transport height is based on hitch pins being 24 in. (609 mm) above ground on DuraDisc 107M model and 18 in. (457 mm) above ground on DuraDisc 108M and 109M


New Holland & CMC Motors Group ©
back to top