Designed and built by New Holland, T7000 Auto Command benefits from a new generation of CVT transmission. With four direct drive points, offering 100% mechanical efficiency, plus advanced double clutch control, you get the smoothest and most productive CVT available.
Auto Command allows the operator to set a target speed of between 30m/hr right through to 50km/hr. No steps. No range changes. Just a seamless choice to match your every need.
Auto Command can be operated in one of four modes.
• Manual Mode. Allows the operator to set the engine
and forward speed required. Speed can be adjusted
using the Force Based CommandGrip™ handle.
• Auto Mode. Select the desired Target Speed
and Auto Command will match the engine and
transmission to maintain it.
• Cruise Mode. Once a desired operating speed has been
achieved, Cruise Mode allows the operator to set the
transmission to maintain the speed for economy and productivity.
• PTO mode. As soon as the PTO is engaged, Auto Command
will operate to preserve a constant engine speed.
New Holland has developed its Auto Command transmissions so they can exploit the low running speed, high torque New Holland engines. With 50kph ECO, the engine can run at a fuel efficient 1550 rpm.
A key safety feature of Auto Command™ is Active StartStop. When the tractor is brought to a standstill, the transmission prevents the tractor moving back or forwards. Even with a heavy load. When the transmission takes up drive, there is no risk of roll back on steep inclines. For safe parking, an electronic brake is easily engaged via the shuttle lever.
