Features
- Wide conditioning offering
- TopDry™ wide spreading
- TopSafe™ protection system
- Durable Cutterbar design
Technical information
Standard 
Optional 
Optional DiscCutter L
| 320P |
| 320S |
| 320R |
| Drawbar Type | Working width (m) | Conditioner type | Flotation type | Swath width (m) | TopSafe™ protection system | Blade type | Number of discs/blades | Number of swivel gearboxes | Minimum PTO Power (kW/hp(CV)) | Hydraulic remote required | Power take-off | PTO speed (rpm) | Linkage category | Transport width (m) | Tyres, standard | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lateral pull | 3.11 | PE-fingers | Springs | 1.2-2.0 | | Twisted blades | 8/16 | 1 | 70/94 | 1S + 1D | 1⅜ - 6 splines | 1000 | II | 3 | 380/55-17 FL+ | 2440 |
| Lateral pull | 3.11 | Flails | Springs | 1.2-2.0 | | Twisted blades | 8/16 | 1 | 70/94 | 1S + 1D | 1⅜ - 6 splines | 1000 | II | 3 | 380/55-17 FL+ | 2470 |
| Lateral pull | 3.11 | Rubber Chevron Rolls | Springs | 1.2-2.0 | | Twisted blades | 8/16 | 1 | 70/94 | 1S + 1D | 1⅜ - 6 splines | 1000 | II | 3 | 380/55-17 FL+ | 2520 |
DiscCutter C
| 320P |
| 320S |
| 20R |
| 360P |
| 360S |
| 360R |
| Drawbar Type | Working width (m) | Conditioner type | Flotation type | Swath width (m) | TopSafe™ protection system | Blade type | Number of discs/blades | Number of swivel gearboxes | Minimum PTO Power (kW/hp(CV)) | Hydraulic remote required | Power take-off | PTO speed (rpm) | Linkage category | Transport width (m) | Tyres, standard | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Central pull | 3.11 | PE-fingers | Springs | 1.2-2.0 | | Twisted blades | 8/16 | 2 | 70/94 | 1S + 1D | 1⅜ - 6 splines | 1000 | II | 3 | 380/55-17 FL+ | 2600 |
| Central pull | 3.11 | Steel flails | Springs | 1.2-2.0 | | Twisted blades | 8/16 | 2 | 70/94 | 1S + 1D | 1⅜ - 6 splines | 1000 | II | 3 | 380/55-17 FL+ | 2630 |
| Central pull | 3.11 | Rubber Chevron Rolls | Springs | 1.2-2.0 | | Twisted blades | 8/16 | 2 | 70/94 | 1S + 1D | 1⅜ - 6 splines | 1000 | II | 3 | 380/55-17 FL+ | 2680 |
| Central pull | 3.52 | PE-fingers | Springs | 1.2-2.2 | | Twisted blades | 9/18 | 2 | 75/102 | 1S + 1D | 1⅜ - 6 splines | 1000 | II | 3.4 | 380/55-17 FL+ | 2700 |
| Central pull | 3.52 | Steel flails | Springs | 1.2-2.2 | | Twisted blades | 9/18 | 2 | 75/102 | 1S + 1D | 1⅜ - 6 splines | 1000 | II | 3.4 | 380/55-17 FL+ | 2785 |
| Central pull | 3.52 | Rubber Chevron Rolls | Springs | 1.2-2.2 | | Twisted blades | 9/18 | 2 | 75/102 | 1S + 1D | 1⅜ - 6 splines | 1000 | II | 3.4 | 380/55-17 FL+ | 2800 |
Standard
Optional – Not available