BC5000

A PROUD HERITAGE OF INNOVATION

Gallery

Models

BC5060

Cross section in. (cm)14x18 (36x46)
LengthAdjustable, 12 to 52 in. (31 to 132 cm)
Feed Opening sq. in. (cm²)283 (1826)
Horsepower (min.) (hp/kW)62/45


Standard  Optional 
BC5060
Bale Size
Cross section in. (cm)14x18 (36x46)
LengthAdjustable, 12 to 52 in. (31 to 132 cm)
Super-Sweep Pickup
Width inside in. (m)65 (1.65)
Width on flare in. (m)70 (1.8)
Number of teeth110 on five tooth bars
Floating windguardEight rods
DriveV-belt to roller chain to “lost motion” reel drive
Gauge wheel3.00x12; semi-pneumatic
Rotary Feeding System
TypePacker fork in combination with two paired rotors
DriveChain from main drive shaft; sealed ball bearings on all shafts
Feed Opening
Feed Opening sq. in. (cm²)283 (1826)
Plunger
Stroke length in. (cm)30 (76.2)
Speed (540 rpm) (SPM)93
ConstructionHigh-strength steel throughout; modified extension is built into the plunger face, eliminating the need for bolt-on extensions
Tying Mechanisms
TypeKnotter or twister
ProtectionShearbolt
Capacity (twine)Six balls
Capacity (wire)Four coils
Main Drive
Flywheel diameter in. (cm)22 (56)
PTOThree-joint
ProtectionShearbolt, overrunning and slip clutches
GearboxHypoid with tapered roller bearings; heat-treated alloy steel running in oil
Tires
Flotation (right)27x9.50-15, 6PR
Flotation (left)31x13.50-15, 6PR
Dimensions
Height (max.) in. (cm)70 (178)
Width in. (cm)110 (279)
Length with 3-joint PTO and quarter-turn bale chute in. (cm)247 (626)
Weight (approximate)
With three-joint PTO, twine version lb. (kg)3,400 (1542)
With three-joint PTO, wire version lb. (kg)3,536 (1603)
Recommended Transport Speed
Recommended Transport Speed mph (km/h)20 (32)
Tractor Requirement*
Horsepower (min.) (hp/kW)62/45
Options
Options-

BC5070

Cross section in. (cm)14x18 (36x46)
LengthAdjustable, 12 to 52 in. (31 to 132 cm)
Feed Opening sq. in. (cm²)283 (1826)
Horsepower (min.) (hp/kW)75/56


Standard  Optional 
BC5070
Bale Size
Cross section in. (cm)14x18 (36x46)
LengthAdjustable, 12 to 52 in. (31 to 132 cm)
Super-Sweep Pickup
Width inside in. (m)75 (1.9)
Width on flare in. (m)80 (2)
Number of teeth156 on six tooth bars
Floating windguardThirteen rods
Drive
Gauge wheel15x6.00x6
Rotary Feeding System
TypePacker fork in combination with three paired rotors
DriveChain from main drive shaft; sealed ball bearings on all shafts
Feed Opening
Feed Opening sq. in. (cm²)283 (1826)
Plunger
Stroke length in. (cm)30 (76.2)
Speed (540 rpm) (SPM)93
ConstructionHigh-strength steel throughout; modified extension is built into the plunger face, eliminating the need for bolt-on extensions
Tying Mechanisms
TypeKnotter or twister (heavy-duty)
ProtectionShearbolt
Capacity (twine)Eight balls
Capacity (wire)Four coils
Main Drive
Flywheel diameter in. (cm)22 (56)
PTOThree-joint
ProtectionShearbolt, overrunning and slip clutches
GearboxHypoid with tapered roller bearings; heat-treated alloy steel running in oil
Tires
Flotation (right)27x9.50-15, 6PR
Flotation (left)31x13.50-15, 6PR
Dimensions
Height (max.) in. (cm)71 (180)
Width in. (cm)120 (304)
Length with 3-joint PTO and quarter-turn bale chute in. (cm)247 (626)
Weight (approximate)
With three-joint PTO, twine version lb. (kg)3,715 (1685)
With three-joint PTO, wire version lb. (kg)3,851 (1746)
Recommended Transport Speed
Recommended Transport Speed mph (km/h)20 (32)
Tractor Requirement*
Horsepower (min.) (hp/kW)75/56
Options
OptionsBall hitch

– Not available
* Tractor weight must be greater than baler weight; excludes bale thrower.



New Holland & CMC Motors Group ©
back to top