TT

MODERN STYLE AND GREAT DYNAMICS

Models

TT55

Power@rated speed (2500 rpm) (kW/hp)40.25/54
Transmission - 30 kph8F+2R, constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection
Maximum lift capacity at ball ends with assist arms (kg)1900
Overall length 2WD/4WD (mm)3500/3640


Standard  Optional 
TT55
Engine
EngineTurbocharged Tier 3
No. of cylinders / aspiration3 / naturally
Capacity (cm³)2931
Bore x stroke (mm)104x115
Power@rated speed (2500 rpm) (kW/hp)40.25/54
Max. torque (gross) (Nm@rpm)210.6 @1375
Torque rise (%)31.8
Fuel tank capacity (l)62
Transmission - 30 kph8F+2R, constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection
Speed range (kph)3.22 - 32.29
Optional with creeper (F+R)12+3
Min. speed with creeper (kph)1.03
Optional without creeper (F+R)12+3
Speed range (kph)2.17 - 32.33
Axles
2WD front axle
4WD front axle
Hydraulics
Flexion Bar lower link draft sensing
Rear linkage categoryCat. II
Mechanical lift with Lift-O-Matic™
Position, draft, mixed and float controls
Main pump flow - Standard (lpm)34
Steering pump flow (lpm)28.8
Max. number of remote valves2
Linkage
Maximum lift capacity at ball ends with no assist arms (kg)1360
Maximum lift capacity at ball ends with assist arms (kg)1900
PTO
Engine speed at 540 rpm (rpm)1967
PTO activationmechanical
Turn angle 2WD/4WD (°)52/38
Min. turn radius 2WD/4WD (mm)3150/4200
Dimensions
Overall length 2WD/4WD (mm)3500/3640
Overall width 2WD/4WD (mm)1925/1925
Height to top of exhaust 2WD/4WD (mm)2200/2200
Wheelbase 2WD/4WD2055/2010
Track width Front 2WD (mm)1400 - 1795
Track width Front 4WD (mm)1545 - 1875
Track width Rear Min. / Max. (all axle types) (mm)1475 - 1985
Ground clearance under rear axle475
Weights
Minimum weight ROPS 2WD/4WD with 50 kg balast
in front & no additional ballast provided on rear (kg)
2280/2370

TT75

Power@rated speed (2500 rpm) (kW/hp)54.7/73.4
Transmission - 30 kph8F+2R, constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection
Maximum lift capacity at ball ends with assist arms (kg)2100
Overall length 2WD/4WD (mm)3685/3685


Standard  Optional 
TT75
Engine
EngineTurbocharged Tier 3
No. of cylinders / aspiration4 / naturally
Capacity (cm³)3908
Bore x stroke (mm)104x115
Power@rated speed (2500 rpm) (kW/hp)54.7/73.4
Max. torque (gross) (Nm@rpm)259.6 @1375
Torque rise (%)25.1
Fuel tank capacity (l)62
Transmission - 30 kph8F+2R, constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection
Speed range (kph)3.05 - 30.6
Optional with creeper (F+R)12+3
Min. speed with creeper (kph)0.99
Optional without creeper (F+R)12+3
Speed range (kph)2.06 - 30.58
Axles
2WD front axle
4WD front axle
Hydraulics
Flexion Bar lower link draft sensing
Rear linkage categoryCat. II
Mechanical lift with Lift-O-Matic™
Position, draft, mixed and float controls
Main pump flow - Standard (lpm)34
Steering pump flow (lpm)28.8
Max. number of remote valves2
Linkage
Maximum lift capacity at ball ends with no assist arms (kg)1480
Maximum lift capacity at ball ends with assist arms (kg)2100
PTO
Engine speed at 540 rpm (rpm)1967
PTO activationmechanical
Turn angle 2WD/4WD (°)52/38
Min. turn radius 2WD/4WD (mm)3285/4200
Dimensions
Overall length 2WD/4WD (mm)3685/3685
Overall width 2WD/4WD (mm)1990/1990
Height to top of exhaust 2WD/4WD (mm)2400/2400
Wheelbase 2WD/4WD2200/2160
Track width Front 2WD (mm)1410 - 1910
Track width Front 4WD (mm)1545 - 1875
Track width Rear Min. / Max. (all axle types) (mm)1440 - 2030
Ground clearance under rear axle500
Weights
Minimum weight ROPS 2WD/4WD with 50 kg balast
in front & no additional ballast provided on rear (kg)
2295/2575

Standard Optional



New Holland & CMC Motors Group ©
back to top